QBY-1Powerful Coating Inhibitor for Drilling Fluid
Product Details
This product is a composite ionic copolymer emulsion, which is very fast in dissolution rate, neutral in aqueous solution, strong in inhibiting the dispersing ability of clay and drill cuttings, and has good salt and heat resistance, and has excellent anti sloughing effect, which is favorable for the protection of oil and gas reservoirs.
Product Features
1. The product is polymerized in emulsion form at room temperature and has long enough chain length to form a very strong coating and inhibition.
2. The dissolution rate of the product is very fast. Generally, it can be completely dissolved within two minutes after adding drilling fluid, and there is no floating and caking phenomenon. The utilization rate reaches 100%, so that the drilling fluid can be treated in time.
3. Because of its large molecular weight and high utilization rate, the effective dosage of the product is small, generally 1-2 ‰ can achieve satisfactory inhibition effect.
4. The introduction of a certain proportion of positively charged groups increases the adsorption capacity of the adsorption groups on clay, and can release inhibitory ions, so the anti collapse effect is very good.
5. The product is non-toxic and non fluorescent, which is suitable for exploration wells and drilling environment with high requirements for environmental protection.
Performance Index
project
index
Appearance
Milky white or light yellow viscous liquid
pH
6~8
Intrinsic viscosity100dl/g
≥5.0
Relative expansion reduction rate%
≥60
Packaging, Transportation and Storage
Qby-1, a powerful coating inhibitor for drilling fluid, is packed in plastic drums with net weight of 25kg and 50kg.
The products should be stored in a dry and ventilated warehouse. During transportation, the sun exposure, extrusion and damage of packaging barrel should be avoided.
This product is non flammable, non-toxic, according to non dangerous goods transportation management.
Avoid contact with eyes, or wash with plenty of water.