SFT-ⅠSilicon Fluorine Modified Asphalt for Drilling Fluid
Product Details
Silicon fluorine modified asphalt for SFT-Idrilling fluid is the product of modified asphalt and silicon fluorine polymer. Adding drilling fluid into the product can greatly reduce the permeability of drilling fluid filter cake, reduce the filtration of drilling fluid, enhance the toughness of drilling fluid filter cake, reduce the friction resistance of drilling fluid, and enhance the lubricity. At the same time, it has a good sealing effect on the micro cracks of shale, reduces the hydration dispersion of shale, and has a good anti collapse effect. The introduction of silicofluoropolymer greatly improved the viscosity effect of the additive. The product has good compatibility and can be widely used in various water-based drilling fluids. The recommended dosage is 1.5-3%.
Performance Index
project
index
Appearance
Free flowing powder
pH
8~11
Sieve allowance,%
≤5
Drying loss,%
≤15
Basic pulp
Filtration loss,ml
18±2
Apparent viscosity,mPa·s
15±2
Drilling fluid
Filtration loss,ml
≤10
Filtration losswith high
temperature and high
pressure,ml
≤35Drilling fluid
Apparent viscosity,mPa·s
≤8
Packaging, Transportation and Storage
The packaging bag is a paper plastic three in one packaging bag. The top opening is sewn and bonded with adhesive tape. The net weight of each bag is 25kg ± 1%.
This product is non combustible, non explosive, non-toxic and harmless, and is managed as non dangerous goods transportation.
The products should be protected from moisture, sun and leakage during storage. It is valid for two years.
Avoid contact with eyes, or wash with plenty of water.